Small electronic vibrator

Overload is set at 1. Because of the shallow angle there were frequent plugs which would back up into the disc screen. Solution The customer had a flop gate, pant leg arrangement loading the material to an open truck. In addition they wanted to reduce the re-melt of the product, reduce extra chocolate that was used to compensate for uneven fill, reduce noise, reduce maintenance, be able to vary the output of the vibration, and get guaranteed results. The channel was stitch welded without welding the corners. The customer wanted to correct this problem, so Martin Vibration Systems were contacted. They were using a low-frequency, low-amplitude rapper bar on their fill trays in their chocolate operation.

One plant was experiencing back up with their hog fuel and woods chips. The customer wanted to correct this problem, so Martin Vibration Systems were contacted. They were using a low-frequency, low-amplitude rapper bar on their fill trays in their chocolate operation. Overload is set at 1. Their chocolate mints were not evenly stratified, layered from brown chocolate to green then to dark chocolate. Because of the shallow angle there were frequent plugs which would back up into the disc screen. Situation A regional plant was experiencing back up and flow problems with their hog fuel and woods chips.

In addition they wanted to reduce the re-melt of the product, reduce extra chocolate that was used to compensate for uneven fill, reduce noise, reduce maintenance, be able to vary the output of the vibration, and get guaranteed results. Because of the shallow angle there were frequent plugs which would back up into the disc screen. Their chocolate mints were not evenly stratified, layered from brown chocolate to green then to dark chocolate. Solution The customer had a flop gate, pant leg arrangement loading the material to an open truck.